MAIN FEATURES
1. Easy-VR Stamp development system is a full-featured development board for the Sensory VR Stamp modules.
2. It was designed to allow students or engineers to easily exercise and explore the capabilities of the VR Stamp voice recognition modules.
3. It allows the VR Stamp modules to be interfaced with external circuits to a broad range of the peripheral devices, allowing the user to concentrate just on the software.
What is On Board This Training Kit
1. RS-232 communication with PC or another microcontroller.
2. Support for VR Stamp modules in DIP40 socket
3. Speaker - Speaker system for testing voice recognition applications
4. Pull up or Pull down port defining.
5. Very fast USB 2.0 programmer on board.
6. Microphone - Microphone for voice input.
7. CF card slot - For Compact Flash memory cards.
8. System can be easily configured via clearly marked dip switches.
9. R.T.C. - Real Time Clock for applications which need Real Time data.
10. All pins are connected to ICD connectors for further connecting.
11. 24 buttons for program developing needs.
12. LCD display plugs in via a connector on PC board.
13. External power supply can be DC or AC.
14. Reset circuit
15. Amplifier - Amplifier for speaker
16. Power Supply select - USB or external.
17. 24 leds for displaying states of all pins on the microcontroller at the same time.
18. DIP switch for separating port 2 pins.
19. Selectable contrast :GLCD or for LCD.
20. Choose voltage level to be applied when a button is pressed (GND or +3.3V).
21. Audio Out - Connect your speaker to Easy-RSC4x.
22. The standard LCD is probably the most widely used data visualization component. Normally, it can display two lines of 16 alphanumeric characters, each made up of 5x7 pixels.
23. The chip also supports Sensory's SX synthesis that enables products to contain over five minutes of compressed audio, multiple speaker-independent and speaker-dependent vocabularies, speaker verification, and all application code - all on a single IC.
24. Our latest VRStamp Flash Programmer is driven and powered from a single USB port on your computer. No additional AC power adapter is needed. The programmer is recognized by Windows, which simplifies driver installation.
