Note: 8051 MCU and 8051prog programmer are not included in price !!!
High Quality mikroElektronika Prototype Board with extension pin headers for 44, 40 and 20pin Atmel 8051 microcontroller will give you easiness of programming microcontroller unit. The professional and production experimental boards from mikroElektronika allows easy and fast working. It can be easily connected by IDC 10 pin connector. You will have to press the 8051 into the adapter. After the programming procedure is finished, you can pull the chip out of the adapter.

ZigBee is the name of a specification for a suite of high level communication protocols using small, low-power digital radios based on the IEEE 802.15.4 standard for wireless personal area networks (WPANs), such as wireless headphones connecting with cell phones via short-range radio. The technology is intended to be simpler and cheaper than other WPANs, such as Bluetooth. ZigBee is targeted at radio-frequency (RF) applications that require a low data rate, long battery life, and secure networking.

An analog-to-digital converter, or simply ADC, is a semiconductor device that is used to convert an analog signal into a digital code. In the real world, most of the signals sensed and processed by humans are analog signals. Analog-to-digital conversion is the primary means by which analog signals are converted into digital data that can be processed by computers for various purposes. An analog signal is a signal that may assume any value within a continuous range. Examples of analog signals commonly encountered every day are sound, light, temperature, and pressure, all of which may be represented electrically by an analog voltage or current. A device that is used to convert an analog signal into an analog voltage or current is known as a transducer. An analog-to-digital converter is used to further translate this analog voltage or current into digital codes that consist of 1's and 0's.

Evolving product features and modern communications design require the use of GSM(GPRS). The Teltonika TM2 GSM/GPRS module is small, light weight and low power consumption module that enables GSM/GPRS networks for your device.
Note: Teltonika TM2 GSM/GPRS Module, Antenna with cable and SIM card are not included in price !!!

IrDA transceivers broadcast infrared pulses in a cone that extends 15 to 30 degrees half angle off center. The IrDA physical specifications require that a minimum irradiance be maintained so that a signal is visible up to a meter away. Similarly, the specifications require that a maximum irradiance not be exceeded so that a receiver is not overwhelmed with brightness when a device comes close. In practice, there are some devices on the market that do not reach one meter, while other devices may reach up to several meters.

The MCP201 provides a physical interface between a microcontroller and a LIN half-duplex bus. It is intended for automotive and industrial applications with serial bus speeds up to 20 Kbaud.
The MCP201 provides a half-duplex, bidirectional communications interface between a microcontroller and the serial network bus. This device will translate the CMOS/TTL logic levels to LIN level logic, and vice versa.

System supports 64, 80 and 100 pin PIC24F/24H/dsPIC33F microcontrollers (it comes with PIC24FJ96GA010 - PIC24 16-bit Microcontroller, 96 KB Flash Memory and 8 KB RAM). There is USB 2.0 on-board programmer, on-board mikroICD and on-board TouchPanel controller
NOTE: Touch Screen, Pencil, DS1820, MMC/SD Card, LCD and GLCD are not included in the price !!!

High Quality mikroElektronika LV24-33A Experimental board will give you easiness of programming microcontroller unit. This experimental board supports LV24-33A MCU Cards.

Note: LV24-33 MCU Card and LvPICFlash programmer are not included in price !!!