The BNC connector is used for RF signal connections, for analog and Serial Digital Interface video signals, amateur radio antenna connections, aviation electronics (avionics) and many other types of electronic test equipment. It is an alternative to the RCA connector when used for composite video on commercial video devices, although many consumer electronics devices with RCA jacks can be used with BNC-only commercial video equipment via a simple adapter. BNC connectors were commonly used on 10base2 thin Ethernet networks, both on cable interconnections and network cards,.

MATERIAL USED:

CRIMPING SECTION: JIS SNCM 21
HANDLE: JIS G4051 S50C PLASTIC GRIP: 30% GLASS FIBRE REINFORCED NYLON 6

LENGTH: 175 mm (7")
WIDTH: 80mm (3 1/8")

The CT2700 High Voltage DMM Probe allow a standard digit multimeter to measure voltages up to 40kV or 28kV AC. With a divider ratio of 1,000 to 1, a voltage of 1,000 V will read 1 V on the meter. Output is through 4mm sheathed banana plugs. Minimum meter input impedance is 10Mohm.

Model No :  CT2700

- Divider Ratio: 1000:1
- 40kV / 28kV AC Peak
- Accuracy ±1% to 20kV DC
- Meets IEC 61010-1 CATII P2

Note  :  For More Details Please Visit www.caltestelectronics.com

claw

The cleaved peen can be used to extract bent or partially driven na

It has all steel construction

It cuts,crimps and Strips

A crimping tool having AWG 20-18, 16-14, 12-10.